Refrigerators equipped with a water and ice dispenser typically have a built-in water filter to ensure the water you drink is clean and fresh. The location of the water filter can vary depending on the refrigerator model, such as the Bluaqua BL-filter1 replacement for Whirlpool W10295370A Water Filter, W10295370, Everydrop filter, EDR1RXD1 (6-Pack). In general, the filter is either located in the grille at the base of the fridge or inside the refrigerator, usually in the upper-right corner.
Introduction
Water filters are a key component in any refrigerator equipped with a water dispenser or ice maker. They are designed to remove impurities such as chlorine, lead, and other contaminants from your tap water, improving both the taste and quality. Over time, however, the filter media becomes saturated with these particles, reducing its effectiveness. For optimal performance, it is important to replace your refrigerator’s water filter every six months, or sooner if you notice a change in water taste or clarity.
Replacing the water filter on time ensures that your refrigerator continues to provide safe and clean drinking water for you and your family. In this article, we’ll explore the common locations of water filters in Whirlpool refrigerators and provide a step-by-step guide on how to replace your water filter.
Types of Whirlpool Refrigerators and Filter Locations
Each model of Whirlpool refrigerator may have a different location for its water filter. Below are the most common models and where to find their respective filters:
French 3-Door Model: The filter is located on the back panel, in the grille at the bottom, or the upper right corner inside the fridge.
Side-by-Side Model: You can find the filter in the grille at the bottom, the back panel, or inside the fridge in the upper right corner.
Under-the-Counter Model: The water filter is positioned in the grille at the base of the refrigerator.
Bottom Freezer Model: The filter can be located at the back, in the lower left corner of the grille, or in the upper right corner inside the fridge.
French 4-Door Model: The filter is found in the upper right corner inside the refrigerator or at the back.
Top Freezer Model: The filter cartridge is mounted on the back panel, the lower left side of the grille, or the upper right corner inside the refrigerator.
Common Water Filter Locations
The location of the water filter can vary based on the shape, size, and design of your refrigerator. Here are the common spots to check:
Top Right Corner: The upper right side inside the fridge compartment.
Top Left Corner: The upper left corner inside the refrigerator compartment.
Lower Left Grille: Located behind the kick grille under the fridge, typically on the left side.
Bottom Center: The filter is at the bottom of the fridge compartment, usually between the drawers.
How to Locate the Water Filter
Before replacing the water filter, it is essential to locate it within your refrigerator. Here are a few tips to help you find the correct location:
Check the Model: Confirm your Whirlpool refrigerator model and its specific filter location.
Inspect the Fridge Base and Upper Corners: Most Whirlpool refrigerators will have the filter either at the fridge base grille or inside in the upper right corner.
Look for Indicator Lights: Many fridges have a filter icon or indicator light that turns red when it is time to change the filter cartridge.
Consult the Manual: If you still can’t locate the filter, refer to the refrigerator’s manual for detailed instructions.
How to Replace the Water Filter
Replacing your refrigerator’s water filter is a straightforward process that typically takes just a few minutes. Follow these steps:
Locate the Filter: Find the filter location using the guidance above or the refrigerator manual.
Prepare the Area: Place a towel under the filter area to catch any drips. Remove any food or items from around the filter area.
Turn Off the Ice Maker: If your refrigerator has an ice maker, turn it off before replacing the filter.
Turn Off the Water Supply: Older models may not automatically shut off the water supply when the filter is removed.
Remove the Old Filter: If the filter is located in the grille, press down the release lever or button and pull the filter out. For filters without a button, turn the filter counterclockwise to release it.
Install the New Filter: Insert the new filter, aligning it correctly, and push or twist it into place. For button filters, ensure you hear a click to confirm it is secure.
Flush the Water System: Run about 4 gallons of water through the dispenser to remove any air or loose carbon particles. Turn the ice maker back on after flushing.
Reset the Filter Indicator: If your refrigerator has a filter indicator, reset it to remind you when the next replacement is due.
Conclusion
Knowing where to find and how to replace the water filter in your Whirlpool refrigerator, such as the Bluaqua BL-filter1 replacement for Whirlpool W10295370A Water Filter, ensures you always have access to clean and safe drinking water. Proper maintenance and timely replacements will help maintain your refrigerator’s performance, providing you with the best quality water every day.Bluaqua BL-filter1 replacement for Whirlpool W10295370A Water Filter, W10295370, Everydrop filter, EDR1RXD1 (6-Pack)
